商品情報にスキップ
NaN -Infinity

余の辞書に、不可能という文字はない

余の辞書に、不可能という文字はない

作成者:産婦人科M

通常価格 ¥3,296 JPY
通常価格 ¥3,296 JPY セール価格 ¥3,296 JPY
セール 売り切れ
税込 配送料はチェックアウト時に計算されます。

「うーん、そうだね……でもね、とーーっても大変なお仕事なんだよ?すごく力がいるし、それに難しい算数もできないとダメなんだ」

「パパの言うとおりよ、あなた算数苦手でしょ?算数といえば、この前の組分けテストはどうだったの?結菜ちゃんはαクラスに入ったらしいじゃない。今頑張らないと、お友達にどんどんおいて行かれちゃうよ?それでもいいの?」

「好きなことがあるのはいいことだけど、それを仕事にできる人はほんの一握りなんだよ。とにかく今は机に向かう時間を大切にすべきじゃないかなぁ」

「ママたちはあなたの将来を心配して言ってるの。お受験も近いんだから、叶うかどうかわからないような夢よりも、今はまず目の前の勉強に集中して……ちょっと、あなたちゃんと聞いてるの!?」

---------------------------------------------------------------------------

本製品を利用して出力したパーツを購入者ご自身で組み立て、塗装した場合に限り、営利目的で販売していただくことが可能です。

販売に際しては、カラーリングの変更及び部分的なデザインの変更を行っていただくことが可能です。

本製品の購入者は、同梱されているデータを3Dプリンターを用いて出力する場合において、出力回数を制限されることはありません。

Permission is granted to sell the parts output from this product for commercial purposes only if the purchaser assembles and paints the parts himself/herself.

Permission is granted to make coloring changes and partial design changes when you sell the finished product.

The purchaser of this product will not be limited in the number of times this data can be output by the 3D printer.

■商品内容 

・全長約190㎜ 分割済み stlファイル パーツ数12
従来サイズのガレージキットとしてお使いいただけます

データは3Dプリンターによる出力を想定した調整済みです。

3Dプリンターを使用して出力する場合は、スライサーソフトを用いて出力用のデータに変換する必要があります。

使用するプリンターやレジンの種類、出力時の設定によってはダボ穴がはまりにくい場合があります。
その際には出力後に手作業での調整が必要になる場合があります。

■注意事項

データの大幅な加工、3D出力品の大幅な加工は営利目的でない利用の範囲でのみ行っていただけます。

本製品のデータを再配布・販売することはご遠慮ください。

また、本製品を利用した出力品をガレージキットとして配布・販売することはご遠慮ください。

ご不明な点やご意見等ございましたら、以下メールアドレスまでお問い合わせください。
obstetrician.m@gmail.com

■Contents 

・Total length approx. 190 mm pre-divided stl file 12 parts
Can be used as a conventional size garage kit.

The data has been adjusted for output with a 3D printer.

When outputting using a 3D printer, it is necessary to convert the data to output-ready data using slicer software.

Depending on the printer used, the type of resin used, and the output settings, it may be difficult to fit the dowel holes.
In such cases, manual adjustment may be required after output.

■Terms of Use
Major changes to the data or 3D output products may only be made for personal use.
Redistribution or sale of the data of this product is prohibited.
Distribution or sale of the output products using this product as garage kits is also prohibited.
If you have any questions or comments, please contact us at the following e-mail address
obstetrician.m@gmail.com

詳細を表示する

購入時のご注意

画像はイメージです。出力・組み立て・塗装は全てご自身で行ってください。